0086-533-8180355

No.567,Changzheng Road,Zibo City, Shan Dong Province.

0086-18560262888

CONTACT US 

0086-533-8161095

HOTLINE

0086-533-8180355

Add: No.567,Changzheng Road,Zibo City, Shan Dong Province.
Mobile: 0086-18560262888 
Phone: 0086-533-8161095
Email:
gpc@pensc.com

COPYRIGHT © 2019    shandong pengcheng advanced ceramics co.,Ltd     鲁ICP备11002055号-2    Powered by www.300.cn

PENSC

Virtue, kindness, persistence, pragmatism

>
>
PENSC Evaporation Boat for Metalization

PRODUCTS CENTER

PENSC Evaporation Boat for Metalization

Affiliate classification
没有此类产品
Details
PENSC THE MOST ADVANCED PRODUCTION TECHNOLOGY

Using the most advanced production equipment and technology to improve the long-term stability of the product, the products have a world-class performance and quality, to meet the production of metallized film, paper, textiles and other materials, widely used in the vacuum evaporation packaging materials, capacitor metal vacuum coating, paper, aluminum plating, bronzing coating, anti-counterfeit labels such as aluminum plating industry.


WORLD-CLASS PERFORMANCE AND QUALITY

A shorter pre-heating time>

The molten aluminum is easier to spreading wetting

Less spitting and bending of the boats problems

Longer working life

Cost-efficient choice

PENSC

PRODUCT FEATURES AND ADVANTAGES

PENSC

Using the high purity raw materials; ensure the material has the best chemical property. Pressed with two-way, ensure the ceramics have consistent volume density properties.

Adopt international advanced vacuum hot pressing sintering; ensure the evaporation boat materials have stable physical properties.

Pressed with two-way, ensure the ceramics have consistent volume density properties.

Production equipment digital control to ensure stable and reliable product quality.

A unique formulation process and optimum composition, the evaporation boats enhance high thermal shock resistance and breaking strength. Increased the molten aluminum spreading, evaporation efficiency, resist molten aluminum corrosion and extend the working time.

 

Conductive ceramic evaporation boat technical standards

Resistivity (normal temperature) 300-2000μΩ·cm
Evaporation velocity (1450℃) 0.4-0.5g/min·cm2
 
Operating temperature ≤ 1850℃
Heat conductivity (normal temperature 1450℃ ) > 100/40W/mk
Coefficient of thermal expansion(1450℃) (4-6)×10-6K
Bending strength (normal temperature) > 150mpa
Packing Vacuum package

Resistivity Types

Category Nomal temperature resistivity(MOC)
Type-1 200-300
Type-2 300-400
Type-3 400-500
Type-4 500-600
Type-5 600-700
Type-6 700-800
Type-7 800-900
Type-8 900-1000
 

● PENSC supply every type resistivity boats to meet a customer’s required specifications. We usually label actual measurement resistance (normal temperature) for each piece boat.

● Calculation between resistivity and resistance (normal temperature):R=ρ*L/S

● ρ=specific electrical resistivity in moc,L= length of the electric conductor in cm, S= cross sectional area of the electric conductor in cm²

PRODUCTS OPERATING ADVICE

PENSC

In order to yield the greatest performance of evaporation boats, achieve the longest service life. Please read the following:

1. Align the clamp on both sides and keep the surface bright and clean.

2. Make sure good electric contact and heat conduction on end face and side face by graphite paper.

3. At the first time of heating the new boat, please put a length of aluminium wire in the centre of cavity for easily confirming the temperature of boats.

4. The contact point of aluminium wire should be in the length of 1/3 boat or 2/5.

5. The first heating of new boat should not be so fast that will effect deflation .

6. For the first time of new boat, the speed of transmitting aluminium wire should be gradually increased from normal 75% and the power should be gradually induced for the greatest area of spreading molten aluminium.

7. The time for heating new boat should be 15 minutes, and operate the evaporation. as above method of transmitting aluminium at beginning.

8. Please stop transmitting aluminium wire and turn off the power supply after 30-60 seconds at the end of evaporating each rolls.

 

9. About 2 minutes after power off, the evaporation boat cooled to dull red, turn off vacuum.

CONDUCTIVE CERAMIC EVAPORATION BOAT TECHNICAL STANDARDS

Specifications L B H Groove
Size
L1 B1 H1
Size Tolerance Size Tolerance Size Tolerance Size Tolerance Size Tolerance Size Tolerance
350×25.4×11.5 350 ±0.5 25.4 ±0.3 11.5 ±0.2 C 340 ±0.3 21 ±0.1 1.5 ±0.3
350×25.4×11.5 350 25.4 11.5 C 320 21 1.5
420×25.4×11.5 420 25.4 11.5 C 410 21 ±0.1 1.3
125×44×10 125 44 10 C 115 40 1.3
130×40×10 130 40 10 C 120 36 ±0.1 1.3
125×40×10 125 40 10 C 115 36 1.3
130×38×10 130 38 10 C 120 34 ±0.1 1.3
125×38×10 125 38 10 C 115 34 1.3
150×30×10 150 30 10 C 126 25 ±0.2 1.3
130×30×10 130 30 10 C 112 25 1.3
120×35×10 120 35 10 C 110 29 ±0.3 1.3
105×30×10 105 30 10 C 87 25 ±0.2 1.3
110×30×10 110 30 10 C 92 25 ±0.3 1.3
120×30×10 120 30 10 C 100 25 ±0.2 1.3
130×35×10 130 35 10 C 112 29 ±0.3 1.3
110×26×10 110 26 10 C 84 20 1.3
125×22×10 125 22 10 C 105 17 1.3
120×24×10 120 24 10 C 100 20 1.3
110×24×10 110 24 10 C 84 19 1.3
110×16×9 110 16 9 C 84 14 1.3
105×20×10 105 20 10 C 87 16 1.3
130×14×10 130 14 ±0. 10 ±0.1 C 52 ±0.2 10 ±0.1 6 ±0.1
110×6×4 110 6 ±0. 4 C 60 ±0.3 4 2

 

PENSC produce all the type evaporation boats which in the market. Usage in all kinds of metallizing (coating) machines. We also can design and produce the products according to customer's requirements.
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article